PanelDuct® Boot Piece
These boot pieces are required when braching off a main run into another smaller rectangular section. They will be delivered to site pre-assembled, fully integrated with all flanges and fixing frames.
They can also be ordered pre-installed into a PanelDuct rectangular panel.
All boot pieces are 150mm in depth and taper at an angle of 37.5°.
- A = X1 + 115
- B = X1 + 185
- Depth = 150
- Angle = 37.5°
Available in the following size combinations:
Width (X1) |
Height Out (Y1) |
