PanelDuct® 30° Elbow Bend
Elbow panels are composed of 4 individual flat panels which pushfit together to form a 30° bend section. Elbow panels are supplied with integrated aluminium flanges. Airflow direction is guided by the panel walls, so turning vanes are not required.
Two of these elbow panels connected in series results in a 60° bend.
This elbow bend can be connected in series to a 45° elbow to produce a 75° bend.
Panel assembly is self guiding and can only be assembled in one way.
- A=B=(Y1*0.268)+169
- C=(Y1*0.5)+315
- D=Y1+145
Available in the following size combinations:
Width (X1) |
Height (Y1) |
